Find a Service Center
Boston Gear
F7726-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #100993047
- 0.75 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Pattern | 6.38 x 3.38 |
| Worm Position | Universal |
| Input HP @ RPM | 0.89 hp @ 1750 rpm, 0.64 hp @ 1150 rpm |
| Style | Right Angle |
| Media Mapping Style | F |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque | 1385 lb-in |
| Bore Code | B5 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Output Speed | 29.2 rpm |
| Lubrication | None |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Use With | 726 |
| Output Shaft | Solid |
| Material | Cast Iron, Standard Paint |
| Output Configuration | Left Output |
| Input Motor HP | 0.75 |
| Box Width | 5.9 in |
| Shaft Assembly Code | G |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Center Distance Code | 726 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Motor HP | 3/4 hp |
| Torque Out @ 1750 rpm | 1385 in lb |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Rated Efficiency | 72% |
| Input Configuration | C-Face Quilled |
| Base Mounting Attachment | No Base |
| Box Length | 7 3/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Frame | 56C |
| Input (Shaft or Bore) Size | 5/8 in |
| Frame Size | 56C |
| Media Mapping Output | G |
| Fan Cooled | No |
| Box Height | 8 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Motor Frame Size | B556C |
| Center Distance | 2.625 in |
| Reduction Type | Single |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Max. Input HP @ 100 rpm | 0.1 hp |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Family Name | F |
| Output Torque @ RPM | 1385 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Ratio | 60:1 |
| Motor Application | General Purpose |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Series | 700 |
| Washdown Duty | No |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Torque Out @ 1150 rpm | 1390 in lb |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Standard | AGMA Service Class I |
| Housing Material | Cast Iron |
| Output Shaft Projection | Solid Left Output |
| Output Bore Shaft Dia. | 1.125 in |
| Input Power Rating | 0.89 hp, 0.664 kW |
| Weight | 41.1 LB |
| EAN or UPC | 781711520505 |
