Find a Service Center
- 24 Diametral Pitch
- 14.5⁰ Pressure Angle
- 42 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Diametral Pitch | 24 |
| No. of Teeths | 42 |
| Rated Torque [Max] | 26. @ 1800 rpm |
| Bore Dia. | 0.375 in |
| Torque at 1200 RPM | 32.3 lb/in |
| Outside Dia. [Min] | 1.83 in |
| Set Screw Size | N/A |
| Hub Dia. | 1.12 in |
| Origin | Finished Bore |
| Face Width | 0.25 in |
| O.D. | 1.83 in |
| Pressure Angle | 14 1/2 degrees |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 1800 RPM | 26 lb/in |
| Bore Size | 0.375 in |
| No. of Teeth | 42 |
| Keyway | N/A |
| Set Screw | N/A |
| Pitch Diameter | 1.75 in |
| Torque at 600 RPM | 42.4 lb/in |
| Torque at 900 RPM | 36.6 lb/in |
| Outside Dia. | 1.83 in |
| Torque at 300 RPM | 50.3 lb/in |
| Torque at 200 RPM | 53.6 lb/in |
| Length Through Bore | 0.625 in |
| Bore Type | Bored to Size |
| Type | A |
| Material | Steel |
| Pitch Dia. | 1.75 in |
| Weight | 0.251 LB |
| EAN or UPC | 781711096161 |
