Find a Service Center
Boston Gear
HF715-10-B5-H-P16
700 Series 10:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base
Item #101795715
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Center Distance Code | 715 |
| Washdown Duty | No |
| Output Shaft | Hollow |
| Frame | 56C |
| Ratio | 10:1 |
| Frame Size | 56C |
| Box Height | 5 3/8 in |
| Output Torque | 397 lb-in |
| Media Mapping Hollow Bore | P16 |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Base to Centerline of Output Shaft | 1 29/32 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Input HP @ RPM | 0.73 hp @ 1150 rpm, 1.2 hp @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Lubrication | None |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Output Bore Shaft Dia. | 1 in |
| Fan Cooled | No |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Worm Position | Universal |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Motor HP | 1 hp |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Material | Cast Iron, Standard Paint |
| Box Length | 5 1/8 in |
| Motor Frame Size | B556C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Rated Efficiency | 92% |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Output Speed | 175 rpm |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Configuration | Hollow Output |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Bore Code | B5 |
| Family Name | HF |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Torque Out @ 1150 rpm | 350 in lb |
| Output Torque @ RPM | 350 in lb @ 1150 rpm, 397 in lb @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Width | 4 3/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Style | Right Angle |
| Reduction Type | Single |
| Keyway Size | 3/16 x 3/32 |
| Shaft Assembly Code | H |
| Series | 700 |
| Media Mapping Output | H |
| Output Shaft Projection | Hollow Output |
| Standard | AGMA Service Class I |
| Torque Out @ 1750 rpm | 397 in lb |
| Input Motor HP | 1 |
| Output (Shaft or Bore) Size | 1 in |
| Media Mapping Style | HF |
| Center Distance | 1.54 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Use With | 715 |
| Motor Application | General Purpose |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Weight | 18.1 LB |
| EAN or UPC | 781711630082 |
