Find a Service Center
Boston Gear
HF7713-5-B5-H-P10
700 Series 5:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base
Item #101796326
- 1 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Mount in the horizontal position only.
- High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
| Output Speed | 350 rpm |
| Frame | 56C |
| Box Height | 4 21/32 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Media Mapping Hollow Bore | P10 |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Worm Position | Universal |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Input Motor HP | 1 |
| Media Mapping Style | HF |
| Center Distance Code | 713 |
| Washdown Duty | No |
| Bore Code | B5 |
| Style | Right Angle |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Family Name | HF |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Base Mounting Attachment | No Base |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Output Shaft Projection | Hollow Output |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Box Width | 3 41/64 in |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Bolt Center | 3 1/4" x 2" |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Lubrication | None |
| Output (Shaft or Bore) Size | 5/8 in |
| Keyway Size | 3/16 x 3/32 |
| Input Configuration | C-Face Quilled |
| Fan Cooled | No |
| Input Power Rating | 1.39 hp, 1.037 kW |
| Ratio | 5:1 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Standard | AGMA Service Class II |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Frame Size | 56C |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Motor HP | 1 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Torque Out @ 1150 rpm | 200 in lb |
| Box Length | 4 1/4 in |
| Rated Efficiency | 94% |
| Output Bore Shaft Dia. | 0.625 in |
| Motor Frame Size | B556C |
| Shaft Assembly Code | H |
| Use With | 713 |
| Torque Out @ 1750 rpm | 235 in lb |
| HP @ RPM | 1 hp @ 1800 rpm |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Output Configuration | Hollow Output |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance | 1.33 in |
| Series | 700 |
| Output Shaft | Hollow |
| Output Torque | 235 lb-in |
| Reduction Type | Single |
| Material | Cast Iron, Standard Paint |
| Media Mapping Output | H |
| Weight | 13.1 LB |
| EAN or UPC | 781711630013 |
