Find a Service Center
Alternate Products
- 12 Diametral Pitch
- 14.5⁰ Pressure Angle
- 14 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Torque at 1200 RPM | 107 lb/in |
| No. of Teeth | 14 |
| No. of Teeths | 14 |
| Torque at 1800 RPM | 89.6 lb/in |
| Outside Dia. [Min] | 1.33 in |
| Keyway | w/Setscrew |
| Material | Steel |
| Outside Dia. | 1.33 in |
| O.D. | 1.33 in |
| Length Through Bore | 1.250 in |
| Torque at 600 RPM | 131 lb/in |
| Hub Dia. | 0.91 in |
| Set Screw | Yes |
| Pressure Angle | 14 1/2 degrees |
| Bore Size | 0.500 in |
| Set Screw Size | 1/2 |
| Diametral Pitch | 12 |
| Torque at 900 RPM | 118 lb/in |
| Torque at 200 RPM | 156 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Pitch Diameter | 1.168 in |
| Bore Dia. | 0.5 in |
| Origin | Finished Bore |
| Bore Type | Bored to Size |
| Rated Torque [Max] | 89.6 @ 1800 rpm |
| Face Width | 0.75 in |
| Torque at 300 RPM | 149 lb/in |
| Pitch Dia. | 1.167 in |
| Type | A |
| Weight | 0.251 LB |
| EAN or UPC | 781711460634 |
