Find a Service Center
Alternate Products
- 8 Diametral Pitch
- 14.5⁰ Pressure Angle
- 96 Teeths
- Cast Iron Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Pressure Angle | 14 1/2 degrees |
| O.D. | 12.25 in |
| Torque at 200 RPM | 2019 lb/in |
| Set Screw | No |
| Outside Dia. | 12.25 in |
| Bore Size | 1.250 in |
| Rated Torque [Max] | 1608 @ 300 rpm |
| Keyway | w/o Keyway, w/o Setscrew |
| Material | Cast Iron |
| Length Through Bore | 2.375 in |
| Torque at 300 RPM | 1608 lb/in |
| Type | D |
| No. of Teeth | 96 |
| Pitch Dia. | 12 in |
| Pitch Diameter | 12 in |
| Torque at 1800 RPM | N/A |
| No. of Teeths | 96 |
| Torque at 1200 RPM | N/A |
| Origin | Reborable |
| Outside Dia. [Min] | 12.25 in |
| Bore Dia. | 1.25 in |
| Bore Type | Minimum Plain Bore |
| Hardened Teeth | Without Hardened Teeth |
| Diametral Pitch | 8 |
| Hub Dia. | 3 in |
| Torque at 600 RPM | 998 lb/in |
| Face Width | 1.25 in |
| Torque at 900 RPM | N/A |
| Weight | 17.801 LB |
| EAN or UPC | 781711104026 |
