Find a Service Center
Boston Gear
RF718-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870560
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Bore Shaft Dia. | 0.875 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Box Width | 5 1/32 in |
| Rated Efficiency | 92% |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Box Height | 5 3/4 in |
| Media Mapping Output | G |
| Bore Code | B5 |
| Material | Cast Iron, Standard Paint |
| Lubrication | None |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Housing Material | Cast Iron |
| Shaft Assembly Code | G |
| Use With | 718 |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Torque Out @ 1750 rpm | 536 in lb |
| Ratio | 10:1 |
| Center Distance Code | 718 |
| Motor Application | General Purpose |
| Family Name | RF |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Box Length | 5 1/2 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Frame Size | 56C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Frame | 56C |
| Fan Cooled | No |
| Base Mounting Attachment | No Base |
| Output Torque | 536 lb-in |
| Max. Input HP @ 100 rpm | 0.12 hp |
| HP @ RPM | 1 hp @ 1800 rpm |
| Input Motor HP | 1.50 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Output (Shaft or Bore) Size | 7/8 in |
| Keyway Size | 3/16 x 3/32 |
| Input Configuration | C-Face Coupled |
| Motor HP | 1 hp |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Output Speed | 175 rpm |
| Series | 700 |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Torque Out @ 1150 rpm | 480 in lb |
| Style | Right Angle |
| Motor Frame Size | B556C |
| Washdown Duty | No |
| Output Shaft | Solid |
| Output Configuration | Left Output |
| Center Distance | 1.75 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Worm Position | Universal |
| Media Mapping Style | RF |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Weight | 27.1 LB |
| EAN or UPC | 781711526712 |
