Find a Service Center
- Molded Delrin Material
- 32 Teeth
- 32 Diametral Pitch
- 1.062 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Keyway | w/o Keyway, w/o Setscrew |
| Bore Size | 0.250 in |
| No. of Teeths | 32 |
| Diametral Pitch | 32 |
| Torque at 200 RPM | 8.8 lb/in |
| Origin | Reborable |
| No. of Teeth | 32 |
| Pitch Dia. | 1 in |
| Material | Molded Delrin |
| Outside Dia. | 1.0625 in |
| Hub Dia. | 0.63 in |
| Torque at 1200 RPM | 6.3 lb/in |
| O.D. | 1.062 in |
| Torque at 900 RPM | 6.8 lb/in |
| Length Through Bore | 0.498 in |
| Type | B |
| Torque at 1800 RPM | 5.3 lb/in |
| Torque at 300 RPM | 8.4 lb/in |
| Style | Hub |
| Bore Type | Minimum Plain Bore |
| Pressure Angle | 20 degrees |
| Face Width | 0.188 in |
| Torque at 600 RPM | 7.6 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Set Screw Size | N/A |
| Pitch Diameter | 1 in |
| Outside Dia. [Min] | 1.0625 in |
| Bore Dia. | 0.25 in |
| Set Screw | N/A |
| Weight | 0.021 LB |
| EAN or UPC | 781711540183 |
