Find a Service Center
- Molded Delrin Material
- 48 Teeth
- 32 Diametral Pitch
- 1.562 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Set Screw Size | N/A |
| Outside Dia. [Min] | 1.5625 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 200 RPM | 13.4 lb/in |
| Hub Dia. | 0.63 in |
| Torque at 1800 RPM | 6.9 lb/in |
| Pitch Diameter | 1.5 in |
| Pressure Angle | 20 degrees |
| Torque at 1200 RPM | 8.5 lb/in |
| Type | B |
| Face Width | 0.188 in |
| Bore Size | 0.250 in |
| No. of Teeth | 48 |
| Hardened Teeth | Without Hardened Teeth |
| Material | Molded Delrin |
| Torque at 300 RPM | 12.7 lb/in |
| Bore Type | Minimum Plain Bore |
| Style | Hub |
| Torque at 600 RPM | 10.9 lb/in |
| Torque at 900 RPM | 9.5 lb/in |
| Outside Dia. | 1.5625 in |
| Bore Dia. | 0.25 in |
| Pitch Dia. | 1.5 in |
| Origin | Reborable |
| Length Through Bore | 0.498 in |
| Set Screw | N/A |
| O.D. | 1.562 in |
| Diametral Pitch | 32 |
| No. of Teeths | 48 |
| Weight | 0.031 LB |
| EAN or UPC | 781711540251 |
