Find a Service Center
- 32 Diametral Pitch
- 20⁰ Pressure Angle
- 56 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Set Screw | N/A |
| Material | Molded Delrin |
| Bore Size | 0.3125 in |
| No. of Teeths | 56 |
| Origin | Reborable |
| Hub Dia. | 0.67 in |
| Torque at 300 RPM | 14.8 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 1200 RPM | 9.4 lb/in |
| Diametral Pitch | 32 |
| Set Screw Size | N/A |
| Outside Dia. [Min] | 1.8125 in |
| Torque at 600 RPM | 12.4 lb/in |
| Length Through Bore | 0.498 in |
| Pitch Dia. | 1.75 in |
| Pressure Angle | 20 degrees |
| Torque at 900 RPM | 10.8 lb/in |
| Bore Type | Minimum Plain Bore |
| Bore Dia. | 0.313 in |
| Torque at 200 RPM | 15.8 lb/in |
| No. of Teeth | 56 |
| Outside Dia. | 1.8125 in |
| Torque at 1800 RPM | 7.6 lb/in |
| Pitch Diameter | 1.75 in |
| O.D. | 1.812 in |
| Face Width | 0.188 in |
| Style | Hub |
| Type | B |
| Weight | 0.031 LB |
| EAN or UPC | 781711540275 |
