Find a Service Center
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Number of Teeth/Threads | 20 |
| Hub Projection (in) | 0.625 |
| Material | Steel |
| Standards Met | AGMA |
| Overall Length (in) | 1.625 |
| Face Width (in) | 1 |
| Length Through Bore | 1.625 in |
| Diametral Pitch | 10 |
| Pressure Angle | 14 1/2 degrees |
| Hub Diameter (in) | 1.71875 |
| Pitch Diameter (in) | 2 |
| Length Through Bore (in) | 1.625 |
| Bore Type | Bored to Size |
| Bore Size | 1.000 in |
| Pitch Diameter | 2 in |
| No. of Teeth | 20 |
| Bore (Max) (in) | 1 |
| Bore (Min) (in) | 1 |
| Bore Size (in) | 1 |
| Outside Diameter (in) | 2.2 |
| Weight | 0.9 LB |
| EAN or UPC | 662289127498 |
