Find a Service Center
Alternate Products
- 2.688 Bore Diameter
- 6 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| Material | Carbon Steel |
| Lubricated | Yes |
| Flange Type | Shrouded Bolt |
| Configuration | Flex-Rigid |
| Inch/Metric | Inch |
| Model | Series H |
| Speed [Max] | 12000 rpm |
| Bore Size [Max] | 2.6880000000000002 |
| Bore Type | Rough |
| Size Code | 1.5 |
| Bore with Standard Key For Rigid Hub [Max] | 2.6880000000000002 |
| Length Through Bore | 1.844 in, 46.831 mm |
| Bolt Type | Shrouded |
| Bore Dia. [Max] | 2 11/16 in |
| O.D. | 6 in |
| Tooth Profile | Crowned |
| Torque Rating | 17000 in-lb |
| Component Type | Rigid Hub |
| Sleeve O.D. | 6 in |
| Coupling Size | 1.5 |
| Coupling Type | Gear |
| Hub Dia. | 3.813 in |
| Weight | 0.0 LB |
| EAN or UPC | 662384110180 |
