Find a Service Center
Alternate Products
- 3.375 Bore Diameter
- 7 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| O.D. | 7 in |
| Hub Dia. | 4.813 in |
| Bolt Type | Shrouded |
| Component Type | Rigid Hub |
| Inch/Metric | Inch |
| Sleeve O.D. | 7 in |
| Flange Type | Shrouded Bolt |
| Bore with Standard Key For Rigid Hub [Max] | 3.375 |
| Torque Rating | 31500 in-lb |
| Bore Size [Max] | 3.375 |
| Lubricated | Yes |
| Configuration | Flex-Rigid |
| Length Through Bore | 2.281 in, 57.944 mm |
| Tooth Profile | Crowned |
| Speed [Max] | 9300 rpm |
| Size Code | 2 |
| Coupling Size | 2 |
| Coupling Type | Gear |
| Model | Series H |
| Bore Dia. [Max] | 3 3/8 in |
| Material | Carbon Steel |
| Bore Type | Rough |
| Weight | 15.52 LB |
| EAN or UPC | 662384110197 |
