Find a Service Center
Alternate Products
- 4.75 Bore Diameter
- 9.438 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| Bore Size [Max] | 4.75 |
| Lubricated | Yes |
| Coupling Type | Gear |
| Bore Dia. [Max] | 4 3/4 in |
| Sleeve O.D. | 9.438 in |
| Inch/Metric | Inch |
| Model | Series H |
| Material | Carbon Steel |
| Hub Dia. | 6.75 in |
| Length Through Bore | 3.469 in, 88.106 mm |
| Speed [Max] | 6800 rpm |
| Configuration | Gear |
| Tooth Profile | Crowned |
| Torque Rating | 101000 in-lb |
| Size Code | 3 |
| Bore with Standard Key For Rigid Hub [Max] | 4.75 |
| Flange Type | Shrouded Bolt |
| Coupling Size | 3 |
| Component Type | Rigid Hub |
| Bolt Type | Shrouded |
| O.D. | 9.438 in |
| Bore Type | Rough |
| Weight | 0.0 LB |
| EAN or UPC | 662384110210 |
