When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
Large bore capacity with o-ring seal design. The most economical gear coupling design.
Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
Bore Size [Max]
8
Sleeve O.D.
16.75 in
Flange Type
Exposed Bolt
Bolt Type
Exposed
Inch/Metric
Inch
Model
Series H
Coupling Type
Gear
Hub Dia.
10.75 in
O.D.
16.75 in
Length Through Bore
6.969 in, 177.006 mm
Material
Carbon Steel
Tooth Profile
Crowned
Speed [Max]
3880 rpm
Component Type
Rigid Hub
Configuration
Gear
Bore Type
Rough
Coupling Size
5.5
Torque Rating
580000 in-lb
Bore with Standard Key For Rigid Hub [Max]
8
Bore Dia. [Max]
8 in
Size Code
5.5
Lubricated
Yes
Weight
203.95 LB
EAN or UPC
662384110142
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
