Find a Service Center
Alternate Products
- 10 Bore Diameter
- 20.75 in Outer Diameter
applications
- When driving and driven shafts are widely separated, an unsupported or floating shaft is used to the span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a Rigid Hub, each unit called a F
features
- Large bore capacity with o-ring seal design. The most economical gear coupling design.
- Curved face teeth (sizes 1 through 7) for up to 1.5 degrees static misalignment capability.
- Series H coupling sleeves will bolt to all competitor couplings sizes 1 through 7 for interchangability in flex halves.
- Precision-drilled flange bolt holes with special body-fitting, grade 5 bolts for a long-lasting piloted flange connection.
| Coupling Type | Gear |
| Hub Dia. | 13.375 in |
| Configuration | Gear |
| Bore Size [Max] | 10 |
| HP @ RPM | 110 hp @ 100 rpm |
| Size Code | 7 |
| Model | Series H |
| Torque Rating | 1160000 in-lb |
| Speed [Max] | 3000 rpm |
| Sleeve O.D. | 20.75 in |
| Tooth Profile | Crowned |
| Inch/Metric | Inch |
| Bore Dia. [Min] | 1/2 in |
| O.D. | 20.75 in |
| Bore Dia. [Max] | 10 in |
| Lubricated | Yes |
| Coupling Size | 7 |
| Component Type | Rigid Hub |
| Material | Carbon Steel |
| Input Bore Range | 1/2" to 10" |
| Bore Type | Rough |
| Length Through Bore | 8.75 in, 222.25 mm |
| Bolt Type | Exposed |
| Bore with Standard Key For Rigid Hub [Max] | 10 |
| Flange Type | Exposed Bolt |
| Weight | 403.0 LB |
| EAN or UPC | 662384110166 |
