Rugged Cast-Iron Housing: Provides maximum strength and dependability.
High lead angle worm is case hardened, ground and polished.
Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
Shaft Seal Material
Nitrile
Max. Overhung Load @ 1750 rpm
388 lbf
Output Speed
350 rpm
Torque Out @ 1750 rpm
240 in lb
Input HP @ RPM
1.15 hp @ 1150 rpm, 1.44 hp @ 1750 rpm
Output RPM
350
Reducer
Worm - Right Angle
Thermal Output Torque Rating
323 @ 1750 Input
Input Configuration
C-Face Quilled
Max. Overhung Load @ RPM
388 lbf @ 1750 rpm
Output Shaft Assembly Code
R
Box Length
5.13 in
No. of Gear Reductions
Single
Motor Application
General Purpose
Assembly
Q-R
Input (Shaft or Bore) Size
5/8 in
Series
Raider
Max. Thrust Load @ 1150 rpm
911 lbf
Output Shaft Direction
Right
Output Torque @ RPM
240 in lb @ 1750 rpm, 283 in lb @ 1150 rpm
Output Shaft Thrust Load [Max]
806
Output Shaft Key Square
0.188
Torque Out @ 1150 rpm
283 in lb
Input Keyway (C Face)
3/16 x 3/32
Center Distance Range
1 in Thru 3.25 in
Thermal Input Horsepower @ RPM
1.15 hp @ 1150 rpm, 1.44 hp @ 1750 rpm
Base to Shaft Center Height w/Vert. "J" Base Kit
3.5 in
Thermal Input Horsepower
1.939 @ 1750 Input
Output RPM @ 1750 rpm Input
350 rpm
HP @ RPM
1 hp @ 1200 rpm, 1 hp @ 1800 rpm
Output Torque
323 in-lbs @1750 Input RPM
Center Distance
1.54 in
Input Bore (C Face)
0.625 in
Thermal Output Torque @ RPM
240 in lb @ 1750 rpm, 283 in lb @ 1150 rpm
Base to Shaft Center Height w/High Vert. Base Kit
4.38 in
Max. Thrust Load @ RPM
806 lbf @ 1750 rpm, 911 lbf @ 1150 rpm
Box Height
5.38 in
Reducer Style
Standard
Output (Shaft or Bore) Size
3/4 in
Motor Frame Size
56C
Frame
56C
Output RPM @ Input RPM
350 rpm @ 1750 rpm
Washdown Duty
No
Mechanical Output Torque Rating
323 @ 1750 Input
Bolt Centers w/ Vertical "J" Base Kit (in)
7 1/4 x 2 1/2
Base to Shaft Center Height w/Std. Base Kit
2 1/2 in
Base to Shaft Center Height w/Low Vert. Base Kit
3 in
Service Factor
1
Input HP
1.66 @ 1750 RPM
Output Shaft Key Length
1.5
Bolt Centers w/ Std. Base Kit (in)
5 1/4 x 4 5/16
Gear Drive Reductions
Single
Bolt Centers w/ Vertical Base Kits (in)
7 x 4
Box Width
3.69 in
HP Range
1 to 1-1/2 (< 2)
Output Key
3/16 x 1.25
Input Speed
1750 rpm
Output Configuration
Right Output
Gear Type
Worm
Ratio
5:1
Output Shaft
Solid
Input Dia.
0.625 in
Output Shaft OHL [Max]
388
O.D.
0.75 in
Max. Input HP @ 100 rpm
0.14 hp
Input Style
C-Face Quill
Housing Material
Cast Iron
Frame Size
56C
Output Torque Rating Range [Max]
500 in lbs
Output Torque Rating Range [Min]
250 in lbs
Shaft Size
0.75
Thermal Input Horsepower @ 1750 RPM
1.44 hp
Efficiency
0.8
Weight
21.0 LB
EAN or UPC
662288340355
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
