Find a Service Center
- M Series
- 3.25 in Bore Size
description
- Intended for high-speed outer race overrunning, incorporating a unique cam cage construction that uses centrifugal force to minimize cam drag. The driving speed of the clutch cannot exceed the rpm shown in the table for the inner race.
applications
- Amusement rides
- Auxiliary drives
- Conveyors
- Food processing
- Heat treat furnaces
- HVAC systems
- Packaging machinery
- Punch press machinery
- Start-up drives
features
- Morse Mechanical Clutches offer the most complete and versatile selection of backstop, overriding, and index cluthes in the industry
- The M series ball bearing clutch contain precision formed cams made from high quality steel and precision ground. Our most versatile clutch, this unit is the workhorse of the industry
- MR is for high- speed outer race overruning. Incorporating a unique cam construction that uses centrifugal force to minimize cam drag
caution
- If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing
| Model No. | MR750 |
| No. of Mounting Holes | 8 |
| Design | Ball Bearing Supported |
| Lubrication | Oil |
| Thread Diameter | 1/2 |
| Overrunning Speed Outer Race | 2600 rpm |
| Torque Capacity | 7000 ft-lbs |
| Sprag Lift Off | 2.5 rpm |
| Type | Outer Race Overruning |
| Outside Dia. | 8.750 in |
| Overrunning Speed Inner Race | 525 rpm |
| Threads per Inch | 20 |
| Outer Race [Max] | 2600 rpm |
| Mode of Operation | High Speed Outer Race Overrunning |
| Bore Size [Min] | 2.438 in |
| Series | M |
| Indexing Clutch | Yes |
| Backstopping Clutch | Yes |
| Inner Race Width | 6 in |
| Model | MR |
| Overall Diameter | 8.75 in |
| Outer Width | 5.875 in |
| Nominal Overrunning Drag | 2.5 ft-lb |
| Overall Width | 5.875 in |
| Bore Size [Max] | 3.438 in |
| Bore Size | 3.250 in |
| Keyway | Keyway on Inside Diameter |
| Overrunning Clutch | Yes |
| Weight | 84.0 LB |
| EAN or UPC | 662288495741 |
