High phosphorous electroless nickel plated 52100 steel for exceptional corrosion resistance
High performance triple lip contact seal design provides multi-directional sealing with 304 stainless steel body and flinger to minimize contamination ingress and retain lubrication
High quality solid base designed investment cast passivated 316 stainless steel casting providing the highest amount corrosion resistance currently available for stainless steel housings.
Solid construction with machined base was designed for minimal gaps and no fillers
Zone hardened inner ring with 120° spacing setscrew lock with corrosion resistant setscrews
Exclusive locking pin and dimple system provides a direct lubricant into the bearing cavity & ball path instead of around a lubrication groove, prevents outer ring rotation.
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
Tapered Lands ensures that lubricant will be easily redirected back to the raceway.
USDA H1 complaint food grade grease
options
Corrosion Resistant
Expansion
No
Duty Series
Standard
Centerline to Front Face
0.875 in
Housing Color
Silver
Bore Shape
Straight
Overall Length (in)
5.375
Centerline to Front Face (in)
0.875
Lubrication
Calcium Sulfonate NLGI 2 NSF H1 Food Grade Grease
Relubricatable
Yes
Angle of Misalignment
±2°
Locking Type
Set Screws
Bore Size - Inch
1.25
Retainer Type
Land Riding
Replaceable Insert
Yes
Overall Height to Inner Ring
1.625 in
Overall Length
5.375 in
Foot Height
0.375 in
Bolt Center-to-Center Length
1.875 in
Flange Type
3-Bolt Flange Bracket
Housing Base
Solid
Measure Units
Inch
Foot Height (in)
0.375
Bore Size
1.25 in
Inner Race Heat Treat Method
Zone-Hardened
Operating Temperature [Max]
220 °F
Inner Ring OD (in)
1.594
Overall Height to Inner Ring (in)
1.625
Outer Ring Land Profile
Standard
Housing Width (in)
3.25
Inch/Metric
Inch
Misalignment Type
Static Only
Speed [Max]
2300 rpm
Housing Width
3.25 in
Overall Height to End Cap
2.531 in
Bearing Type
Ball Bearing
Insert No.
PN-20R
Seal Type
Triple Lip Contact
Housing Construction
One Piece
Housing Material
Stainless Steel
Pilot Configuration
No Pilot
End Cap
Yes
Internal Clearance
Standard
Bolt Center-to-Center Length (in)
1.8750
Bearing Insert Coating
Phosphorus Nickel
Inner Ring O.D.
1.594 in
Insert Material
52100 Bearing Steel, Phosphorus Nickel Coated
Maximum Operating Temperature
220
Weight
3.0 LB
EAN or UPC
662461337363
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
