Sealmaster | SFT-18C | Cast Iron 2-Bolt Flange Set Screws Lock Standard Duty Flange Unit

SFT-18C

Cast Iron 2-Bolt Flange Set Screws Lock Standard Duty Flange Unit

Item #101180609

Auto Replenish

each One-time purchase

Product Details

Designed for flush mounting with machined bases for light loads and two bolt holes.

Powder coated epoxy cast iron housing with extended inner ring bearings
Zone hardened inner ring with 120° spacing setscrew lock with corrosion resistant setscrews
Zone hardened inner ring with 120° spacing setscrew lock with diamond faceted setscrews
Single lip contact seal and flinger
Unique land riding retainer design provides superior pocket clearance that allows for 360° grease circulation around the rolling elements resulting in better retained and utilized lubrication.
Sealmaster® exclusive lock pin & dimple for direct lubrication and anti-rotation

Specifications

Bolt Center-to-Center Length (in)	4.5940
Bolt Circle Dia.	4 19/32 in
Bolt Size	0.438 in
Flange Type	2-Bolt Flange
Overall Height to Inner Ring	1.563 in
Bearing Type	Ball Bearing
Inner Ring OD (in)	1.594
Platform	Gold Line Ball Bearing
Maximum Operating Temperature	220
Speed [Max]	5450 rpm
Inner Ring O.D.	1.594 in
Centerline to Front Face	0.875 in
Expansion	No
Relubricatable	Yes
Outer Ring Land Profile	Standard
Series	SFT
Bolt Center-to-Center Length	4.594 in
Foot Height	0.531 in
Housing Construction	One Piece
Replaceable Insert	Yes
Overall Length	5.563 in
Overall Height to Inner Ring (in)	1.563
Housing Base	Solid
Centerline to Front Face (in)	0.875
Angle of Misalignment	±2°
Housing Color	Gray
Pilot Configuration	No Pilot
Bolt Hole Spacing	4 19/32 in
End Cap	No
Inch/Metric	Inch
Misalignment Type	Static Only
Bearing Design	Non-Expansion
Internal Clearance	Standard
Bore Size - Inch	1.125
Locking Device	Setscrew Locking Collar
End Type	Open End
Overall Length (in)	5.563
Retainer Type	Land Riding
Foot Height (in)	0.531
Bore Size	1.125 in
Housing Length	5 9/16 in
Housing Material	Cast Iron
Inner Race Heat Treat Method	Zone-Hardened
Mounted Unit Duty	Standard Duty
Insert Material	52100 Bearing Steel, Black Oxided
Bore Shape	Straight
Duty Series	Standard
Seal Type	Single Lip Contact
Bearing Insert Coating	Black Oxide
Measure Units	Inch
Shaft Dia.	1.125 in
Locking Type	Set Screws
Bolt Size (in)	0.4375
Lubrication	Lithium Complex NLGI 2 Grease
Insert No.	2-12C
Operating Temperature [Max]	220 °F
Weight	2.59 LB
EAN or UPC	662461022603