Find a Service Center
- 5/32" Shaft, Stainless Steel, Radially Assembled Type, Stacked
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Shaft Dia. | 0.156 in |
| Inch/Metric | Inch |
| Outside Dia. | 0.282 in |
| Tape Rings Stack | 250 |
| Length of Stack | 6.25 in |
| Series | E |
| Groove Depth | 0.02 in |
| Clearance Installed in Groove | 0.295 in |
| Load Capacity [Max] | 175 lbs |
| Tape Width | 5/8 in |
| RPM Limit | 31000 rpm |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Edge Margin | 0.04 in |
| Tape Length of Stack | 6.25 in |
| Limiting Speed | 31000 rpm |
| Finish | None |
| Package Type | Stacked |
| Thickness | 0.025 in |
| Plating | N/A |
| Thrust Groove Safety Factor of 2 Pg Lb | 75 lbf |
| Thrust Ring Safety Factor of 3 Pr Lb | 178 lbf |
| Type | Radially Assembled |
| Weight | 0.005 LB |
| EAN or UPC | 721717029589 |
