Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.156 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Limiting Speed | 31000 rpm |
| Length of Stack | 6.25 in |
| RPM Limit | 31000 rpm |
| Type | Radially Assembled |
| Inch/Metric | Inch |
| Tape Length of Stack | 6.25 in |
| Shaft Dia. | 0.156 in |
| Clearance Installed in Groove | 0.295 in |
| Finish | Phosphate |
| Edge Margin | 0.04 in |
| Tape Rings Stack | 250 |
| Groove Depth | 0.02 in |
| Material | Carbon Steel |
| Plating | Phosphate |
| Series | E |
| Package Type | Stacked |
| Thrust Groove Safety Factor of 2 Pg Lb | 75 lbf |
| Tape Width | 5/8 in |
| Thickness | 0.025 in |
| Outside Dia. | 0.282 in |
| Load Capacity [Max] | 175 lbs |
| Thrust Ring Safety Factor of 3 Pr Lb | 178 lbf |
| Weight | 0.005 LB |
| EAN or UPC | 721717023778 |
