Find a Service Center
- 3/16" Shaft, Stainless Steel, Radially Assembled Type, Stacked
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Plating | N/A |
| Groove Depth | 0.02 in |
| Inch/Metric | Inch |
| Thickness | 0.025 in |
| Clearance Installed in Groove | 0.35 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 90 lbf |
| Tape Length of Stack | 6.25 in |
| Limiting Speed | 30000 rpm |
| Edge Margin | 0.04 in |
| Length of Stack | 6.25 in |
| Series | E |
| Type | Radially Assembled |
| Load Capacity [Max] | 190 lbs |
| Finish | None |
| Thrust Ring Safety Factor of 3 Pr Lb | 193 lbf |
| Shaft Dia. | 0.188 in |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Package Type | Stacked |
| Tape Rings Stack | 250 |
| Outside Dia. | 0.335 in |
| Tape Width | 1 in |
| RPM Limit | 30000 rpm |
| Weight | 0.008 LB |
| EAN or UPC | 721717016848 |
