Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.188 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Shaft Dia. | 0.188 in |
| Inch/Metric | Inch |
| Material | Carbon Steel |
| Series | E |
| Finish | Phosphate |
| Limiting Speed | 30000 rpm |
| Thickness | 0.025 in |
| Clearance Installed in Groove | 0.35 in |
| Groove Depth | 0.02 in |
| Package Type | Loose |
| Plating | Phosphate |
| Outside Dia. | 0.335 in |
| Type | Radially Assembled |
| Load Capacity [Max] | 190 lbs |
| Length of Stack | 6.25 in |
| Weight | 0.007 LB |
| EAN or UPC | 721717032411 |
