Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.188 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Load Capacity [Max] | 190 lbs |
| Length of Stack | 6.25 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 90 lbf |
| Package Type | Stacked |
| Groove Depth | 0.02 in |
| Edge Margin | 0.04 in |
| RPM Limit | 30000 rpm |
| Plating | Zinc |
| Thickness | 0.025 in |
| Clearance Installed in Groove | 0.35 in |
| Material | Carbon Steel |
| Shaft Dia. | 0.188 in |
| Type | Radially Assembled |
| Series | E |
| Tape Width | 1 in |
| Finish | Zinc Dichromate |
| Inch/Metric | Inch |
| Limiting Speed | 30000 rpm |
| Outside Dia. | 0.335 in |
| Tape Rings Stack | 250 |
| Tape Length of Stack | 6.25 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 193 lbf |
| Weight | 0.007 LB |
| EAN or UPC | 721717015070 |
