Find a Service Center
- 3/8" Shaft, Stainless Steel, Radially Assembled Type, Stacked
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| RPM Limit | 20000 rpm |
| Thrust Groove Safety Factor of 2 Pg Lb | 315 lbf |
| Tape Width | 1.25 in |
| Plating | N/A |
| Package Type | Stacked |
| Limiting Speed | 20000 rpm |
| Tape Length of Stack | 8.75 in |
| Tape Rings Stack | 250 |
| Outside Dia. | 0.66 in |
| Inch/Metric | Inch |
| Load Capacity [Max] | 690 lbs |
| Shaft Dia. | 0.375 in |
| Finish | None |
| Thrust Ring Safety Factor of 3 Pr Lb | 700 lbf |
| Thickness | 0.035 in |
| Groove Depth | 0.036 in |
| Series | E |
| Clearance Installed in Groove | 0.68 in |
| Type | Radially Assembled |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Length of Stack | 8.75 in |
| Edge Margin | 0.072 in |
| Weight | 0.016 LB |
| EAN or UPC | 721717030318 |
