Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.375 in Shaft Size
- 0.035 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Inch/Metric | Inch |
| Groove Depth | 0.036 in |
| Tape Length of Stack | 8.75 in |
| Tape Width | 1.25 in |
| Tape Rings Stack | 250 |
| Shaft Dia. | 0.375 in |
| Thickness | 0.035 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 700 lbf |
| Finish | Phosphate |
| Series | E |
| Type | Radially Assembled |
| Load Capacity [Max] | 690 lbs |
| Material | Carbon Steel |
| Plating | Phosphate |
| Outside Dia. | 0.66 in |
| Clearance Installed in Groove | 0.68 in |
| Package Type | Stacked |
| Edge Margin | 0.072 in |
| RPM Limit | 20000 rpm |
| Length of Stack | 8.75 in |
| Limiting Speed | 20000 rpm |
| Thrust Groove Safety Factor of 2 Pg Lb | 315 lbf |
| Weight | 0.001 LB |
| EAN or UPC | 721717036303 |
