Find a Service Center
- 3/8" Shaft, Carbon Spring Steel (Zinc Plated), Radially Assembled Type, Loose
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Inch/Metric | Inch |
| Type | Radially Assembled |
| Series | E |
| Groove Depth | 0.036 in |
| Material | Carbon Steel |
| Limiting Speed | 20000 rpm |
| Plating | Zinc |
| RPM Limit | 20000 rpm |
| Load Capacity [Max] | 690 lbs |
| Clearance Installed in Groove | 0.68 in |
| Package Type | Loose |
| Shaft Dia. | 0.375 in |
| Thickness | 0.035 in |
| Outside Dia. | 0.66 in |
| Length of Stack | 8.75 in |
| Finish | Zinc Bright |
| Weight | 0.03 LB |
| EAN or UPC | 721717016992 |
