Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.625 in Shaft Size
- 0.042 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Shaft Dia. | 0.625 in |
| RPM Limit | 12000 rpm |
| Length of Stack | 12.5 in |
| Inch/Metric | Inch |
| Finish | Phosphate |
| Tape Length of Stack | 12.5 in |
| Tape Rings Stack | 250 |
| Thrust Groove Safety Factor of 2 Pg Lb | 1050 lbf |
| Outside Dia. | 0.94 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 1441 lbf |
| Plating | Phosphate |
| Tape Width | 2 in |
| Groove Depth | 0.07 in |
| Material | Carbon Steel |
| Package Type | Stacked |
| Clearance Installed in Groove | 0.96 in |
| Thickness | 0.042 in |
| Load Capacity [Max] | 1420 lbs |
| Edge Margin | 0.14 in |
| Series | E |
| Type | Radially Assembled |
| Limiting Speed | 12000 rpm |
| Weight | 0.032 LB |
| EAN or UPC | 721717010549 |
