Find a Service Center
- 3/4" Shaft, Stainless Steel, Radially Assembled Type, Loose
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Inch/Metric | Inch |
| Tape Length of Stack | 12.5 in |
| Edge Margin | 0.17 in |
| Groove Depth | 0.085 in |
| Outside Dia. | 1.12 in |
| Series | E |
| Thickness | 0.05 in |
| Finish | None |
| Plating | N/A |
| Type | Radially Assembled |
| Package Type | Loose |
| Thrust Ring Safety Factor of 3 Pr Lb | 2030 lbf |
| Limiting Speed | 10500 rpm |
| Shaft Dia. | 0.750 in |
| Tape Rings Stack | 250 |
| Tape Width | 2 in |
| Length of Stack | 12.5 in |
| Load Capacity [Max] | 2000 lbs |
| RPM Limit | 10500 rpm |
| Clearance Installed in Groove | 1.14 in |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Thrust Groove Safety Factor of 2 Pg Lb | 1500 lbf |
| Weight | 0.029 LB |
| EAN or UPC | 721717054178 |
