Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.750 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Edge Margin | 0.17 in |
| Inch/Metric | Inch |
| Shaft Dia. | 0.750 in |
| Outside Dia. | 1.12 in |
| Length of Stack | 12.5 in |
| Clearance Installed in Groove | 1.14 in |
| Load Capacity [Max] | 2000 lbs |
| Tape Width | 2 in |
| Thickness | 0.05 in |
| Package Type | Stacked |
| Type | Radially Assembled |
| Groove Depth | 0.085 in |
| Tape Rings Stack | 250 |
| Material | Carbon Steel |
| RPM Limit | 10500 rpm |
| Tape Length of Stack | 12.5 in |
| Plating | Phosphate |
| Finish | Phosphate |
| Limiting Speed | 10500 rpm |
| Series | E |
| Thrust Ring Safety Factor of 3 Pr Lb | 2030 lbf |
| Thrust Groove Safety Factor of 2 Pg Lb | 1500 lbf |
| Weight | 0.029 LB |
| EAN or UPC | 721717004296 |
