Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.750 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Load Capacity [Max] | 2000 lbs |
| Inch/Metric | Inch |
| Tape Width | 2 in |
| Clearance Installed in Groove | 1.14 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 1500 lbf |
| Tape Rings Stack | 250 |
| RPM Limit | 10500 rpm |
| Finish | Phosphate |
| Edge Margin | 0.17 in |
| Thickness | 0.05 in |
| Limiting Speed | 10500 rpm |
| Package Type | Stacked |
| Thrust Ring Safety Factor of 3 Pr Lb | 2030 lbf |
| Tape Length of Stack | 12.5 in |
| Series | E |
| Type | Radially Assembled |
| Plating | Phosphate |
| Outside Dia. | 1.12 in |
| Shaft Dia. | 0.750 in |
| Groove Depth | 0.085 in |
| Material | Carbon Steel |
| Length of Stack | 12.5 in |
| Weight | 0.029 LB |
| EAN or UPC | 721717004296 |
