Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.750 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Plating | Zinc |
| Limiting Speed | 10500 rpm |
| Thickness | 0.05 in |
| Package Type | Stacked |
| Shaft Dia. | 0.750 in |
| Type | Radially Assembled |
| Length of Stack | 12.5 in |
| Groove Depth | 0.085 in |
| Material | Carbon Steel |
| Load Capacity [Max] | 2000 lbs |
| Series | E |
| RPM Limit | 10500 rpm |
| Clearance Installed in Groove | 1.14 in |
| Finish | Zinc Dichromate |
| Outside Dia. | 1.12 in |
| Inch/Metric | Inch |
| Weight | 0.029 LB |
| EAN or UPC | 721717009451 |
