Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.750 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Type | Radially Assembled |
| Series | E |
| Outside Dia. | 1.12 in |
| RPM Limit | 10500 rpm |
| Tape Rings Stack | 250 |
| Thickness | 0.05 in |
| Material | Carbon Steel |
| Plating | Zinc |
| Thrust Ring Safety Factor of 3 Pr Lb | 2030 lbf |
| Groove Depth | 0.085 in |
| Clearance Installed in Groove | 1.14 in |
| Tape Width | 2 in |
| Finish | Zinc Dichromate |
| Package Type | Loose |
| Load Capacity [Max] | 2000 lbs |
| Thrust Groove Safety Factor of 2 Pg Lb | 1500 lbf |
| Tape Length of Stack | 12.5 in |
| Length of Stack | 12.5 in |
| Inch/Metric | Inch |
| Edge Margin | 0.17 in |
| Limiting Speed | 10500 rpm |
| Shaft Dia. | 0.750 in |
| Weight | 0.029 LB |
| EAN or UPC | 721717000922 |
