Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.875 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Tape Length of Stack | 11 in |
| Limiting Speed | 9000 rpm |
| Thrust Ring Safety Factor of 3 Pr Lb | 2385 lbf |
| RPM Limit | 9000 rpm |
| Edge Margin | 0.2 in |
| Finish | Phosphate |
| Tape Rings Stack | 200 |
| Groove Depth | 0.1 in |
| Series | E |
| Tape Width | 1 1/2 in |
| Material | Carbon Steel |
| Package Type | Loose |
| Thrust Groove Safety Factor of 2 Pg Lb | 2050 lbf |
| Inch/Metric | Inch |
| Thickness | 0.05 in |
| Outside Dia. | 1.3 in |
| Clearance Installed in Groove | 1.32 in |
| Shaft Dia. | 0.875 in |
| Plating | Phosphate |
| Load Capacity [Max] | 2350 lbs |
| Length of Stack | 11 in |
| Type | Radially Assembled |
| Weight | 0.019 LB |
| EAN or UPC | 721717019290 |
