Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.875 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Series | E |
| Finish | Zinc Dichromate |
| Package Type | Stacked |
| Clearance Installed in Groove | 1.32 in |
| Plating | Zinc |
| Outside Dia. | 1.3 in |
| Limiting Speed | 9000 rpm |
| Length of Stack | 11 in |
| Load Capacity [Max] | 2350 lbs |
| Shaft Dia. | 0.875 in |
| Thickness | 0.05 in |
| Inch/Metric | Inch |
| Groove Depth | 0.1 in |
| Type | Radially Assembled |
| Material | Carbon Steel |
| Weight | 0.038 LB |
| EAN or UPC | 721717003152 |
