Series RE Radially Assembled External Reinforced Retaining Ring
Item #101605398
each
Series RE Radially Assembled Retaining Ring
0.188 in Shaft Size
0.025 in Thick
Carbon Steel
Phosphate Finish
description
The RE retaining ring is a reinforced version of the E ring which will accommodate higher thrust loadings and rpm. RE rings function in the same size grooves as regular E rings, allowing you to change from one to the other without re-engineering the application.
features
Radially installed into machined grooves on shafts (external)
Accommodate lower thrust loadings than axial retaining rings
Do not have lug holes: Easy to install using retaining ring applicators
Provide protruding “shoulders” for effective retention of assemblies
Economical alternative to Axially Assembled external tapered section rings
Groove Depth
0.02 in
Package Type
Stacked
Outside Dia.
0.375 in
Tape Width
5/8 in
Type
Radially Assembled
Thickness
0.025 in
Edge Margin
0.04 in
Clearance Installed in Groove
0.39 in
Inch/Metric
Inch
Shaft Dia.
0.188 in
Series
RE
Finish
Phosphate
Load Capacity [Max]
180 lbs
Length of Stack
6.25 in
Material
Carbon Steel
Thrust Groove Safety Factor of 2 Pg Lb
50 lbf
Tape Length of Stack
6.25 in
Plating
Phosphate
Thrust Ring Safety Factor of 3 Pr Lb
183 lbf
Tape Rings Stack
250
RPM Limit
50000 rpm
Limiting Speed
50000 rpm
Weight
0.001 LB
EAN or UPC
721717018811
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
