Find a Service Center
- Series SE Radially Assembled Retaining Ring
- 1.375 in Shaft Size
- 0.062 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Finish | Phosphate |
| Package Type | Loose |
| Type | Radially Assembled |
| Limiting Speed | 4000 rpm |
| Thickness | 0.062 in |
| Tape Rings Stack | 0 |
| Clearance Installed in Groove | 1.92 in |
| Material | Carbon Steel |
| Series | SE |
| Thrust Ring Safety Factor of 3 Pr Lb | 4162 lbf |
| Outside Dia. | 1.875 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 2350 lbf |
| Inch/Metric | Inch |
| Load Capacity [Max] | 60 lbs |
| Groove Depth | 0.072 in |
| Shaft Dia. | 1.375 in |
| Edge Margin | 0.144 in |
| RPM Limit | 4000 rpm |
| Plating | Phosphate |
| Weight | 0.038 LB |
| EAN or UPC | 721717116784 |
