Find a Service Center
- 7/32" Shaft, Stainless Steel, Radially Assembled Type, Stacked
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Load Capacity [Max] | 225 lbs |
| Inch/Metric | Inch |
| Tape Rings Stack | 250 |
| Shaft Dia. | 0.219 in |
| Plating | N/A |
| Thrust Ring Safety Factor of 3 Pr Lb | 228 lbf |
| Tape Length of Stack | 6.25 in |
| RPM Limit | 26000 rpm |
| Finish | None |
| Clearance Installed in Groove | 0.45 in |
| Length of Stack | 6.25 in |
| Package Type | Stacked |
| Edge Margin | 0.03 in |
| Outside Dia. | 0.437 in |
| Limiting Speed | 26000 rpm |
| Tape Width | 1 in |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Thrust Groove Safety Factor of 2 Pg Lb | 75 lbf |
| Type | Radially Assembled |
| Thickness | 0.025 in |
| Groove Depth | 0.015 in |
| Series | SE |
| Weight | 0.012 LB |
| EAN or UPC | 721717003817 |
