- 5/16" Shaft, Stainless Steel, Radially Assembled Type, Stacked
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Type | Radially Assembled |
| Outside Dia. | 0.5 in |
| Shaft Dia. | 0.312 in |
| Package Type | Stacked |
| Finish | None |
| Thickness | 0.025 in |
| Plating | N/A |
| Groove Depth | 0.031 in |
| Tape Length of Stack | 6.25 in |
| Edge Margin | 0.062 in |
| Tape Rings Stack | 250 |
| Inch/Metric | Inch |
| Clearance Installed in Groove | 0.52 in |
| RPM Limit | 22000 rpm |
| Limiting Speed | 22000 rpm |
| Thrust Groove Safety Factor of 2 Pg Lb | 225 lbf |
| Series | SE |
| Length of Stack | 6.25 in |
| Load Capacity [Max] | 325 lbs |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Tape Width | 1 1/4 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 330 lbf |
| Weight | 0.015 LB |
| EAN or UPC | 721717023402 |

