- Series SE Radially Assembled Retaining Ring
- 0.312 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Thickness | 0.025 in |
| Load Capacity [Max] | 325 lbs |
| Thrust Ring Safety Factor of 3 Pr Lb | 330 lbf |
| Groove Depth | 0.031 in |
| Material | Carbon Steel |
| Plating | Phosphate |
| Inch/Metric | Inch |
| Package Type | Stacked |
| Tape Length of Stack | 6.25 in |
| Shaft Dia. | 0.312 in |
| Limiting Speed | 22000 rpm |
| Edge Margin | 0.062 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 225 lbf |
| Outside Dia. | 0.5 in |
| Length of Stack | 6.25 in |
| Type | Radially Assembled |
| Finish | Phosphate |
| Tape Width | 1 1/4 in |
| Series | SE |
| Tape Rings Stack | 250 |
| Clearance Installed in Groove | 0.52 in |
| RPM Limit | 22000 rpm |
| Weight | 0.014 LB |
| EAN or UPC | 721717024331 |

