Find a Service Center
- 3/4" Shaft, Stainless Steel, Radially Assembled Type, Loose
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Shaft Dia. | 0.750 in |
| Inch/Metric | Inch |
| Groove Depth | 0.062 in |
| Thickness | 0.05 in |
| Series | SE |
| Length of Stack | 12.5 in |
| Load Capacity [Max] | 1900 lbs |
| Material | Stainless Steel (PH15-7, PH17-7) |
| Plating | N/A |
| Type | Radially Assembled |
| Outside Dia. | 1 in |
| Finish | None |
| Package Type | Loose |
| Clearance Installed in Groove | 1.02 in |
| Limiting Speed | 11000 rpm |
| Weight | 0.018 LB |
| EAN or UPC | 721717044346 |
