Find a Service Center
- Series SE Radially Assembled Retaining Ring
- 0.750 in Shaft Size
- 0.05 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Clearance Installed in Groove | 1.02 in |
| Thickness | 0.05 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 1979 lbf |
| Tape Width | 2 in |
| Length of Stack | 12.5 in |
| Material | Carbon Steel |
| Edge Margin | 0.124 in |
| Groove Depth | 0.062 in |
| Series | SE |
| Inch/Metric | Inch |
| Finish | Phosphate |
| Load Capacity [Max] | 1900 lbs |
| Tape Length of Stack | 12.5 in |
| Package Type | Stacked |
| Shaft Dia. | 0.750 in |
| Limiting Speed | 11000 rpm |
| RPM Limit | 11000 rpm |
| Thrust Groove Safety Factor of 2 Pg Lb | 1100 lbf |
| Plating | Phosphate |
| Tape Rings Stack | 250 |
| Outside Dia. | 1 in |
| Type | Radially Assembled |
| Weight | 0.032 LB |
| EAN or UPC | 721717018453 |
