Find a Service Center
- Series SE Radially Assembled Retaining Ring
- 0.094 in Shaft Size
- 0.015 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| RPM Limit | 36000 rpm |
| Groove Depth | 0.01 in |
| Tape Rings Stack | 250 |
| Tape Width | 3/8 in |
| Inch/Metric | Inch |
| Material | Carbon Steel |
| Load Capacity [Max] | 45 lbs |
| Package Type | Stacked |
| Finish | Phosphate |
| Clearance Installed in Groove | 0.245 in |
| Thickness | 0.015 in |
| Plating | Phosphate |
| Type | Radially Assembled |
| Length of Stack | 3.75 in |
| Outside Dia. | 0.23 in |
| Limiting Speed | 36000 rpm |
| Series | SE |
| Thrust Ring Safety Factor of 3 Pr Lb | 46 lbf |
| Thrust Groove Safety Factor of 2 Pg Lb | 20 lbf |
| Tape Length of Stack | 3.75 in |
| Edge Margin | 0.02 in |
| Shaft Dia. | 0.094 in |
| Weight | 0.002 LB |
| EAN or UPC | 721717033678 |
