Find a Service Center
- Series SHI Axially Assembled Retaining Ring
- 0.750 in Shaft Size
- 0.042 in Thick
- Carbon Steel
- Phosphate Finish
description
- Axially assembled, external inverted
- Functions like an SH ring on a shaft, only the lugs are “reversed.” This version reduces the distance the lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance is minimal.
features
- Axially installed on shafts (external)
- Have lug holes for ease of installation/removal
- Make uniform contact when released in a groove
- Can accommodate higher thrust loadings
- Provide more of a shoulder with which to retain a component or assembly than constant section or spiral retaining rings
| Finish | Phosphate |
| Groove Depth | 0.023 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 600 lbf |
| RPM Limit | 26500 rpm |
| Clearance Released Over Shaft | 0.95 in |
| Clearance Installed in Groove | 0.95 in |
| Thickness | 0.042 in |
| Hole Dia. | 0.042 in |
| Inch/Metric | Inch |
| Thrust Ring Safety Factor of 4 Pr Lb | 2538 lbf |
| Clearance Expanded Over Shaft | 0.99 in |
| Type | Axially Assembled |
| Load Capacity [Max] | 1000 lbs |
| Material | Carbon Steel |
| Shaft Dia. | 0.750 in |
| Series | SHI |
| Load Capacity of Ring | 2538 lbf |
| Plating | Phosphate |
| Package Type | Loose |
| Load Capacity @ 100 KM | 1000 lbf |
| Edge Margin | 0.069 in |
| Weight | 0.25 LB |
| EAN or UPC | 721717033012 |
