These rings look exactly like their HO counterpart, only they have a 15° angle on the outer edge. This combines with a complementary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
features
Axially assembled
Axially installed into machined grooves in housings/bores (internal) or on shafts (external)
Have lug holes for ease of installation/removal
Make uniform contact when released in a groove
Can accommodate higher thrust loadings
Provide more of a shoulder with which to retain a component or assembly than constant section or spiral retaining rings
Edge Margin
0.075 in
Clearance Dia. Released In Groove
1.03 in
Type
Axially Assembled
Thickness Beveled End
0.038 in
Plating
Phosphate
Lug Height
0.18 in
Housing Diameter
1.375 in
Material
Carbon Spring Steel
Package Type
Loose
Gap Width Ring In Groove
0.219 in
Groove Depth
0.05 in
Hole Dia.
0.078 in
Load Capacity [Max]
2400 lbs
Thrust Groove Safety Factor of 2 Pg Lb
2900 lbf
Inch/Metric
Inch
Thickness
0.050 in
End Play Take-Up
0.007 in
Thrust Ring Safety Factor of 4 Pr Lb
9846 lbf
Clearance Compressed in Housing
0.99 in
Series
VHO
Weight
0.012 LB
EAN or UPC
721717018682
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
