These rings look exactly like their HO counterpart, only they have a 15° angle on the outer edge. This combines with a complementary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
features
Axially assembled
Axially installed into machined grooves in housings/bores (internal) or on shafts (external)
Have lug holes for ease of installation/removal
Make uniform contact when released in a groove
Can accommodate higher thrust loadings
Provide more of a shoulder with which to retain a component or assembly than constant section or spiral retaining rings
Thickness
0.062 in
End Play Take-Up
0.007 in
Package Type
Loose
Gap Width Ring In Groove
0.275 in
Load Capacity [Max]
3900 lbs
Type
Axially Assembled
Plating
Phosphate
Thrust Groove Safety Factor of 2 Pg Lb
3600 lbf
Groove Depth
0.056 in
Edge Margin
0.084 in
Clearance Compressed in Housing
1.11 in
Housing Diameter
1.562 in
Clearance Dia. Released In Groove
1.15 in
Material
Carbon Spring Steel
Thickness Beveled End
0.048 in
Thrust Ring Safety Factor of 4 Pr Lb
13906 lbf
Lug Height
0.202 mm
Hole Dia.
0.078 mm
Inch/Metric
Inch
Series
VHO
Weight
0.022 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
