These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
features
Axially installed on shafts (external)
Have lug holes for ease of installation/removal
Make uniform contact when released in a groove
Can accommodate higher thrust loadings
Provide more of a shoulder with which to retain a component or assembly than constant section or spiral retaining rings
Thickness Beveled End
0.047 in
Edge Margin
0.102 in
Package Type
Loose
Shaft Dia.
2.000 in
Load Capacity [Max]
3000 lbs
Lug Height
0.262 mm
Thrust Ring Safety Factor of 4 Pr Lb
14819 lbf
Finish
Phosphate
Thrust Groove Safety Factor of 2 Pg Lb
4800 lbf
Inch/Metric
Inch
Thickness
0.062 in
Plating
Phosphate
Hole Dia.
0.125 mm
Groove Depth
0.068 in
Series
VSH
Type
Axially Assembled
Material
Carbon Steel
End Play Take-Up
0.009 in
Clearance Installed in Groove
2.49 in
Clearance Expanded Over Shaft
2.55 in
Weight
0.019 LB
EAN or UPC
721717053874
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
