These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
features
Axially installed on shafts (external)
Have lug holes for ease of installation/removal
Make uniform contact when released in a groove
Can accommodate higher thrust loadings
Provide more of a shoulder with which to retain a component or assembly than constant section or spiral retaining rings
Material
Carbon Steel
Groove Depth
0.074 in
Edge Margin
0.111 in
Series
VSH
Clearance Expanded Over Shaft
2.78 in
Thickness
0.078 in
Thickness Beveled End
0.062 in
Type
Axially Assembled
Thrust Ring Safety Factor of 4 Pr Lb
20097 lbf
Shaft Dia.
2.156 in
Inch/Metric
Inch
Lug Height
0.266 mm
Package Type
Loose
Finish
Phosphate
End Play Take-Up
0.01 in
Load Capacity [Max]
5000 lbs
Plating
Phosphate
Clearance Installed in Groove
2.71 in
Thrust Groove Safety Factor of 2 Pg Lb
5600 lbf
Hole Dia.
0.125 mm
Weight
0.026 LB
EAN or UPC
721717077276
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
