These rings look exactly like their SH counterpart, only they have a 15° angle on the inner edge. This combines with a complimentary groove angle to eliminate endplay by wedging itself between the groove and the retained part.
features
Axially installed on shafts (external)
Have lug holes for ease of installation/removal
Make uniform contact when released in a groove
Can accommodate higher thrust loadings
Provide more of a shoulder with which to retain a component or assembly than constant section or spiral retaining rings
Thickness
0.078 in
Thrust Ring Safety Factor of 4 Pr Lb
22127 lbf
Shaft Dia.
2.375 in
Clearance Expanded Over Shaft
3.01 in
Finish
Phosphate
Thickness Beveled End
0.06 in
Plating
Phosphate
Clearance Installed in Groove
2.94 in
Hole Dia.
0.125 mm
Edge Margin
0.121 in
Material
Carbon Steel
Package Type
Loose
Lug Height
0.267 mm
Load Capacity [Max]
5000 lbs
Inch/Metric
Inch
Thrust Groove Safety Factor of 2 Pg Lb
6800 lbf
Series
VSH
Type
Axially Assembled
Groove Depth
0.081 in
End Play Take-Up
0.011 in
Weight
0.029 LB
EAN or UPC
721717060483
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
